Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. הקדמה

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. תכונות

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Daily and Weekly Programming: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• תצוגת LCD: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• אפשרויות הרכבה: Designed for DIN rail mounting or wall mounting using the included bracket.
• כיסוי מגן שקוף: Provides protection for the display and controls.

3. התקנה והתקנה

אַזהָרָה: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 הרכבה

The E305DIN1 timer can be mounted in two ways:

• הרכבה על מסילת DIN: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• הרכבה על הקיר: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 חיבור לחשמל

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. בדוק שוב את כל החיבורים לאיתנות ולתקינותם לפני חידוש אספקת החשמל.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. הוראות הפעלה

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 הגדרת השעה והיום הנוכחיים

1. הקש על שָׁעוֹן לַחְצָן.
2. תוך כדי אחיזה שָׁעוֹן, לחץ על יְוֹם לחצן כדי להגדיר את היום הנוכחי בשבוע.
3. תוך כדי אחיזה שָׁעוֹן, לחץ על שָׁעָה לחצן כדי להגדיר את השעה הנוכחית.
4. תוך כדי אחיזה שָׁעוֹן, לחץ על MIN לחצן כדי להגדיר את הדקה הנוכחית.

4.2 תכנות זמני הפעלה/כיבוי

The timer allows for up to 8 ON/OFF program pairs.

1. הקש על פרוג button once to enter program mode. The display will show '1 ON'.
2. השתמש ב- יְוֹם, שָׁעָה, ו MIN buttons to set the desired ON time for program 1.
3. לִלְחוֹץ פרוג שוב. התצוגה תציג '1 OFF'.
4. השתמש ב- יְוֹם, שָׁעָה, ו MIN buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. הקש על שָׁעוֹן button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• הקש על יָדָנִי לחצן כדי לעבור בין המצבים:
• עַל: The output is continuously ON, overriding any programmed OFF times.
• OFF The output is continuously OFF, overriding any programmed ON times.
• אוטומטי: הטיימר פועל בהתאם ללוחות הזמנים של הדלקה/כיבוי המתוכנתים.

5. תחזוקה

The Perel E305DIN1 timer requires minimal maintenance.

• ניקוי: נגבו את החלק החיצוני בעזרת מטלית רכה ויבשה. אין להשתמש בחומרי ניקוי שוחקים או ממסים.
• גיבוי סוללה: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
• תנאים סביבתיים: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. פתרון תקלות

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• הטיימר לא נדלק/כבה כפי שתוכנת:
  • בדוק אם הטיימר פועל AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• התצוגה ריקה או מהבהבת:
  • Check the main power supply to the timer.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• הטיימר מאבד הגדרות לאחר ניתוק מהחשמלtage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

אם שלבים אלה אינם פותרים את הבעיה, אנא פנו לתמיכת הלקוחות.

7. מפרטים

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. אחריות ותמיכה

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

שמור את קבלת הרכישה שלך כהוכחת קנייה לצורכי אחריות.