מָבוֹא
The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.
תכונות המוצר
- Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
- בהירות מתכווננת: Offers three distinct light settings, ranging from a low night light to full brightness.
- עיצוב נוח: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
- סגנון מודרני: Features a contemporary black finish and sleek design that complements various home decors.
- התקנה קלה: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.
מידע בטיחות
אנא קראו והבינו את כל ההוראות לפני ההתקנה והשימוש. שמרו מדריך זה לעיון עתידי.
- לשימוש פנימי בלבד.
- אל תחרוג מהוואט המרביtage of 200 Watts for incandescent bulbs.
- ודא את ה-lamp is unplugged from the wall outlet before installation.
- Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
- Do not use this dimmer control with another dimmer in the same circuit.
- יש להרחיק ממים ולחות.
התקנה והתקנה
Follow these steps to install your Westek 6043BC Touch Pad Dimmer:
- הכינו את L.amp: ודא את ה-l שלךamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
- חבר את הדימר: חבר את ה-lamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
- חבר לשקע בקיר: Plug the dimmer unit into a standard wall outlet.
- Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.
Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.
Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.
Figure 3: The circular touch pad component, which is used to control the lamp.
הוראות הפעלה
Once installed, operate the dimmer as follows:
- Turn On/Adjust Brightness: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
- לְכַבּוֹת: After the high brightness setting, touching the pad again will turn the lamp כבוי.
- פאוור אוtage: במקרה של כוח outage, the dimmer may reset. Simply touch the pad to resume normal operation.
תַחזוּקָה
The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.
פתרון בעיות
| בְּעָיָה | סיבה אפשרית | פִּתָרוֹן |
|---|---|---|
| Lamp does not turn on or dim. |
|
|
| Lamp הבהובים או זמזומים. |
|
|
| Lamp turns on by itself occasionally. |
|
|
מפרטים
- דֶגֶם: 6043 לפני הספירה
- מותג: ווסטק
- מצב פעולה: ON-NONE-OFF (3-level dimming)
- מקסימום וואטtage: 200 Watts (Incandescent bulbs only)
- כרך ידtage: 120V, 60Hz
- שיטת בקרה: לָגַעַת
- מידות פריט (L x W x H): 3.9 x 1 x 7.9 אינץ'
- משקל פריט: 3.8 אונקיות
- חוֹמֶר: Multi (Brass contact material)
- צֶבַע: שָׁחוֹר
- שימוש פנימי בלבד: כֵּן
אחריות ותמיכה
The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek webלאתר או לפנות למחלקת שירות הלקוחות שלהם.
יַצרָן: AmerTac
שֵׁירוּת לָקוֹחוֹת: 201.661.9945
Webאֲתַר: www.amertac.com