סטריאו כוח QSC RMX2450 Ampמדריך למשתמש חיים יותר

1. נגמרview

The QSC RMX2450 Stereo Power Amplifier is designed to provide reliable and high-quality audio amplification for professional sound systems. This amplifier features a robust power supply with a high-current toroidal transformer and ample filter capacitance, ensuring consistent performance even with demanding 2-ohm speaker loads. It incorporates a full complementary output circuit with linear output devices for ultra-low distortion and a flat frequency response. The RMX2450 is equipped with professional features such as independent defeatable clip limiters, selectable low-frequency filters, and versatile input/output connectivity options including barrier strip, XLR, 1/4-inch balanced inputs, and Speakon and binding post outputs. Efficient cooling is maintained by low-noise variable speed fans with rear-to-front airflow.

2. מידע בטיחות

Before operating the QSC RMX2450 amplifier, please read and understand all safety instructions. Retain this manual for future reference.

• סכנת התחשמלות: אל תפתח את amplifier chassis. Refer all servicing to qualified personnel.
• מקור כוח: Connect the unit only to a power supply of the type specified in this manual and on the unit.
• אוורור: Ensure proper ventilation. Do not block ventilation openings. Maintain adequate clearance around the amplifier for airflow.
• לַחוּת: אין לחשוף את היחידה לגשם או לחות. אין להניח חפצים מלאים נוזלים על היחידה.
• הַאֲרָקָה: Always connect the power cord to a mains socket outlet with a protective earthing connection.
• ניקוי: נתקו את כבל החשמל לפני הניקוי. השתמשו במטלית יבשה בלבד.

3. התקנה

3.1. פריקה ובדיקה

הסר בזהירות את ampהוצא את המתקן מהאריזה שלו. בדוק את היחידה לאיתור סימני נזק שעשויים להיגרם במהלך ההובלה. אם נמצא נזק, פנה מיד לסוכן שלך.

3.2. Rack Mounting and Placement

The RMX2450 is designed for standard 19-inch equipment rack mounting. Secure the amplifier using all four mounting points to ensure stability. Ensure that the rack provides adequate ventilation, allowing for rear-to-front airflow. Avoid placing the amplifier near heat sources or in enclosed spaces without proper air circulation.

3.3. פקדים ומחוונים בלוח הקדמי

This image displays the front panel of the QSC RMX2450 amplifier. Visible features include the main power switch, individual gain controls for Channel 1 and Channel 2, and LED indicators for signal presence and clipping.

• מתג הפעלה: מחליף את amplifier's main power on or off.
• LED מתח: Illuminates green when the ampהמרגן מופעל.
• Gain Controls (Channel 1 & 2): Rotary controls to adjust the input sensitivity for each channel.
• Signal LEDs (Channel 1 & 2): Green LEDs indicate the presence of an audio signal.
• Clip LEDs (Channel 1 & 2): Red LEDs illuminate when the output signal is clipping, indicating potential distortion.

3.4. Rear Panel Connections and Switches

This image shows the rear panel of the QSC RMX2450 amplifier. It highlights the XLR and 1/4-inch input connectors, Speakon and binding post output connectors, a circuit breaker, and various mode switches for configuration, including clip limiting, low-frequency filters, and bridge mono operation.

• Input Connectors (Channel 1 & 2): Balanced XLR and 1/4-inch TRS connectors for audio input. Barrier strip inputs are also available.
• Output Connectors (Channel 1 & 2): Speakon and binding post connectors for connecting loudspeakers.
• מתגי מצב: DIP switches for configuring various ampפונקציות מפחית:
  • Clip Limiter: Engages or disengages the clip limiting function for each channel.
  • מסנני תדר נמוך: Selectable filters (e.g., 30 Hz, 50 Hz) to protect speakers and optimize low-end response.
  • Stereo/Parallel/Bridge Mono: מגדיר את amplifier's operating mode.
• מפסק: Provides overload protection for the ampחיים יותר.
• כניסת מתח AC: Standard IEC connector for the detachable power cord.

4. תפעול

4.1. הפעלה וכיבוי

1. Ensure all connections are secure and gain controls are set to minimum.
2. Flip the front panel power switch to the 'ON' position. The Power LED will illuminate green.
3. To power off, turn down all gain controls, then flip the power switch to 'OFF'.

4.2. חיבורי כניסה ויציאה

חבר את מקור השמע שלך (מיקסר, קדם-רמקול)amplifier) to the input connectors (XLR, 1/4-inch, or barrier strip) on the rear panel. Connect your loudspeakers to the output connectors (Speakon or binding posts). Ensure correct polarity for all connections.

4.3. Setting Gain Levels

With the audio source playing at a normal operating level, slowly increase the amplifier's gain controls until the desired volume is achieved. Monitor the Signal and Clip LEDs. The Signal LED should flicker with audio presence, and the Clip LED should only flash momentarily on signal peaks. If the Clip LED stays illuminated, reduce the gain to prevent distortion and potential speaker damage.

4.4. Using Clip Limiters

The RMX2450 features independent defeatable clip limiters. When engaged via the rear panel DIP switches, these limiters reduce peak distortion without sacrificing dynamic range. It is generally recommended to keep clip limiters engaged to protect speakers from excessive clipping.

4.5. Configuring Low-Frequency Filters

The rear panel DIP switches allow selection of low-frequency filters (e.g., 30 Hz, 50 Hz). These filters help protect speakers from damaging sub-sonic frequencies and improve low-end tightness. Select the appropriate filter setting based on your loudspeaker's frequency response capabilities.

4.6. Bridge Mono Mode

For maximum power output into a single load, the RMX2450 can operate in Bridge Mono mode. Refer to the rear panel diagram and DIP switch settings for proper configuration. In this mode, only Channel 1 input is used, and the output is taken from specific binding posts or Speakon pins as indicated on the amplifier. Ensure the connected speaker impedance is suitable for bridge mono operation (typically 8 ohms).

5. תחזוקה

5.1. ניקיון

יש לנקות מעת לעת את החלק החיצוני של amplifier with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation grilles are free from dust and debris to maintain proper airflow.

5.2. אוורור

בדקו באופן קבוע ש- amplifier's ventilation openings are not obstructed. Proper airflow is crucial for preventing overheating and ensuring long-term reliability. If the amplifier is rack-mounted, ensure adequate space is provided around the unit.

6. פתרון תקלות

If you experience issues with your QSC RMX2450 amplifier, consult the following table for common problems and solutions.

If the problem persists after attempting these solutions, please contact QSC Customer Support.

7. מפרטים

The following are key technical specifications for the QSC RMX2450 Stereo Power Ampחיים יותר:

• כוח פלט:
  • 500 וואט לערוץ ב-8 אוהם (סטריאו)
  • 750 וואט לערוץ ב-4 אוהם (סטריאו)
  • 1200 וואט לערוץ ב-2 אוהם (סטריאו)
  • 1500 watts @ 8 ohms (bridge mono)
• מספר ערוצים: 2
• כרך ידtage: 120 וולט
• משקל פריט: 44.5 פאונד
• מידות המוצר (L x W x H): 24 x 22 x 7 אינץ'
• סוג הרכבה: הרכבה משטחית (ניתנת להרכבה על מדף)
• טמפרטורת הפעלה: 50 Degrees Fahrenheit (recommended ambient)
• קיים מפרט: FCC
• יַצרָן: QSC
• מספר דגם: QSC RMX2450
• ASIN: B0002BSRM0
• UPC: 684284003720

8. אחריות ותמיכה

8.1. מידע על אחריות

QSC products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official QSC webאֲתַר.

8.2. תמיכת לקוחות

For technical assistance, service, or further information regarding your QSC RMX2450 Stereo Power Amplifier, please contact QSC Customer Support:

• Webאֲתַר: www.qsc.com
• טֵלֵפוֹן: Refer to the QSC webאתר למספרי קשר אזוריים.
• אֶלֶקטרוֹנִי: Refer to the QSC webאתר עבור כתובות דוא"ל של תמיכה.